14.12.2012 Views

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

586 Alarm management<br />

Setting up alarm notification<br />

Before alarm notification can function correctly, you must set up control files. Control<br />

files include the devices file, the configuration file, and the scripts file.<br />

To set up alarm notification, complete the following tasks:<br />

1 Make sure you have the control files correctly installed and the Run Options defined.<br />

See “Setting up a devices file” on page 587 for more information. You can also use<br />

Help in setting up the control files as shown in Figure 287.<br />

2 Determine the IP address of your OTM PC on which you will view the events. This<br />

PC must have Alarm Notification correctly installed. The PC must be networked with<br />

the system to be monitored. See “Sample LD 117 session” on page 581 for<br />

information on determining the IP address.<br />

3 Use LD 117 to enable alarms to be sent to your OTM PC. See “Enabling Meridian 1<br />

system alarms with LD 117” on page 580.<br />

Figure 287<br />

Help for setting up control files<br />

553-3001-330 Standard 3.00 August 2005

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!