Optivity Telephony Manager: System Administration - BT Business

Common services 137
Procedure 6
1 Select a system, go to the System Properties-Network tab.
2 Click Add.
3 Select Branch Media Gateway/MG1000B in the Add Associated Equipment dialog
box (see Figure 36 on page 133) and click OK. A new Add Survivable Branch Media
Gateways dialog box opens.
4 Select the appropriate site and click OK. A new System Properties dialog box opens.
5 Input necessary parameter in the System Properties dialog box-General tab and
click Apply. A new system is added to the tree under the selected site.
6 Click the Network tab. The System Properties dialog box-Network tab opens (see
Figure 39 on page 138).
7 Select the Main Office from the drop-down list. Click Properties to display the
System Properties of the selected Main Office.
8 Enter the IP address for the Signaling Server. You may also define an Alternate
(redundant) Signaling Server. Use the drop-down list to select whether this MG
1000B should be displayed as a Main Office or a subsystem of the Main Office in the
OTM Windows and Web Navigators.
9 Click OK.
Optivity Telephony Manager System Administration