Optivity Telephony Manager: System Administration - BT Business

Station Administration 447
To select all stations that need to be transmitted, you can either select all stations in
NEW, OUT, CHG or RPL status or you can simply select all sets that are not in TRN
status. The selection is the same in either case. For this example, choose all sets that are
not in TRN status:
1 Choose Edit > Select.
2 From the Data Field list, choose SSTAT.
3 Click (not equal to) from the Operator list (or simply type in ).
4 Type “TRN”. (Note: All strings must be enclosed in quotes. Column 2 in the Data
Field List identifies the field as either a string or numeric).
The complete command in the Record Selection Criteria edit box is as follows:
STATION->SSTAT”TRN”
Note that instead of following steps 2 to 4, you can simply type the expression above.
5 Click OK.
All stations are selected except those in TRN status.
Example 2
Select all stations with a prime DN between 4000 and 5000.
To select all stations within this range, select all sets with PRIMEDN>4000 and
PRIMEDN Select.
2 Select PRIMEDN from the Data Field list.
3 Select > from the Operator list (or simply type >).
4 Type “4000”.
5 From the Operator list, select .AND.
6 Select PRIMEDN from the Data Field list.
7 Select > from the Operator list (or simply type >).
8 Type “5000”.
The complete command is as follows:
STATION->PRIMEDN>”4000”.AND.STATION->PRIMEDN