Optivity Telephony Manager: System Administration - BT Business

Station Administration 547
Updating a single station (or template)
Procedure 105
Updating a single station
1 Select Forms > Forms Interface.
This is a toggled menu item. Click it to place a check mark next to the name (selects
it), and click it again to remove the check mark (clears it).
2 Select View > Station.
(To modify a template, select Template.)
The existing stations (or templates) for the system appear in the OTM Station
Administration window.
3 In the OTM Station Administration window, double-click the station (or template) of
interest.
The single station add form (or the template add form) opens.
4 Modify the fields as required.
5 Click OK.
6 For stations: If OTM is in Maintenance mode, the synchronization dialog box
appears. Fill in the dialog box in the same way as with the standard interface. Click
OK.
To invoke synchronization manually if you are in Installation mode, use the Sync menu.
Adding multiple stations
Procedure 106
Adding multiple stations
End of Procedure
1 Select Forms > Forms Interface.
This is a toggled menu item. Click it to place a check mark next to the name (selects
it), and click it again to remove the check mark (clears it).
2 Select Forms > Select Form.
The Select Form dialog box appears. This is a standard Windows file open dialog
box (Figure 275).
Optivity Telephony Manager System Administration