Optivity Telephony Manager: System Administration - BT Business

258 Common services
6 Select the stop bits for the connection in the Stop Bits box.
7 Enter the name of the file to store data collected from the serial port in the File Name
box. The file exists under the selected site and system. Enter a new file name or
select one of the following files from the drop down list.
detail1.img - File used for CDR data
traffic.dmp - File used for Traffic data
8 Rule File is a read-only field containing the name of the rules file for this DBA
session. Edit the field with the Clear and Configure buttons.
553-3001-330 Standard 3.00 August 2005
Clear - Removes the file name from the Rule File field.
Configure - Opens the Rules Manager window shown in Figure 98. You can
create a new rules file or open and edit an existing rules file. If you create a new
rules file, you must define the actions taken when a specific data pattern
appears in the data stream. See “Configure actions and rules’ next.
Configure actions and rules
End of Procedure
Actions and rules are configured for serial connections. The Rules Manager window
allows you to:
Define the file you want to save or load into the Rules Manager
Configure new actions or update or delete existing actions
Configure new rules or update or delete rules, and set the order for applying rules