Optivity Telephony Manager: System Administration - BT Business

422 Station Administration
4 Make changes as desired. Click the various tabs to view and modify different list
parameters.
5 Modify data in the appropriate fields. If you make changes, click Apply before you
move from one tab to the next.
6 When you have completed the changes, click OK.
553-3001-330 Standard 3.00 August 2005
End of Procedure
Set advanced properties
You can change advanced properties for a specific list. Most of the advanced properties
have default values that are set in the Options dialog box (see “Set global list options”
on page 433).
Procedure 88
Setting advanced properties for a list
To set advanced properties for a list (Speed Call and Group Hunt):
1 Select a list and choose File > Properties. The Properties dialog box for the
selected list appears with the General tab selected (Figure 187 on page 416).
2 Click Advanced Properties. The Advanced Properties dialog box appears
(Table 26).
Table 26
Advanced properties for Speed Call lists and Group Hunt lists
Field Description
Network Class of
Service
3 Make your desired changes.
Select a Network Class of Service, as defined on the (applies to
System Speed Call lists).
Max. DN Size Select the maximum length of DNs in the list. The default value is
set in the Options dialog box (Tools - Options).
Max. List Size Select the maximum number of entries allowed in the list. The
default value is set in the Options dialog box (Tools - Options).
Memory Usage - in Words
Free Memory
Available
Indicates how much system memory is available for all lists, as of
the last synchronization.
Used by List Meridian 1 or CS 1000S system memory required for this list.