Optivity Telephony Manager: System Administration - BT Business

672 Maintenance applications
B- and D-channels column definitions
The B- and D-channels window provides columns of information about each loop in the
system. The B- and D-channels list is initially sorted by Channel number. Table 55
describes each column.
Table 55
B- and D-channels window column descriptions
Column name Description
Channel Number associated with the channel. PRI loops may have 0–23
channels; PRI2 loops may have 0–29 channels.
Type Type of channel.
Status Current status of the channel.
Supported B- and D-channel commands
Table 56 lists the supported hardware and commands. Use System Terminal for
hardware or B- and D-channel commands not supported by the B- and D-channels
window.
Table 56
Supported B- and D-channels commands
UIPE D-Channel Monitoring Tool Enhancement
To enable or disable a message, or enhance monitoring, select one of the following:
For a Level Craftsperson command
Select DCH> DCH Monitoring>Set. Choose Outgoing or Incoming Message
Monitor.. Choose Level 0, Level 1, or Level 2.
Select DCH> DCH Monitoring>Flush.
For enabling/disabling messages
553-3001-330 Standard 3.00 August 2005
Hardware Supported Commands supported
The window contains the list of channels
for the selected loop. You can also
access D-channels from the I/O ports
window.
Yes All, except enable all
channels on DTI cards and
loopback test commands