Optivity Telephony Manager: System Administration - BT Business

Alarm management 609
Example:
// (no definition necessary)
.
.
.
// send a console notification
if($CurrentTrapDevice=”Meridian1” and $NormalizedSeverity=Critical){
//Print event to console
send(con,"--> Critical Meridian1 alarm received!",
$ErrorCode," - ", // M1 error code
$CurrentPCTime," - ", // Time that PC received the alarm
$CurrentTrapSource," - " , // Name of this M1
$DeviceTime," - " , // Timestamp from M1
$Text," - ", // Text with error message
$OperatorData); // More text with error message
);
}
This script displays the text “--> Critical Meridian1 alarm received!” followed by the
values for the listed traps, which includes the error code, the current PC time, name of
the M1, time when the alarm occurred, text associated with the error code, and the
Operator data. Note the use of con with the send syntax in the script.
Pager
Alarm Notification supports both alphanumeric and numeric pagers. You define the list
of paging destinations and supported functionality for each pager. Be sure you have a
modem and a valid phone line connection. Messages must match the pager type: up to
30 characters for alphanumeric pagers and only digits for numeric pagers.
Mandatory parameters are:
phone:="408-555-1212";
The phone number you dial to connect to your pager service.
pin:="123456";
The alpha numeric pager’s PIN number, for the type “apager” only.
Examples:
The first example shows a script defined to call an alphanumeric pager named
“my_pager” only on Monday and Thursday through Saturday, from 9:00 a.m. to
5:00 p.m. The PIN and the pager service number are specified. Note that the number
needed to access an external phone line (9) is included. The second example shows a
Optivity Telephony Manager System Administration