14.12.2012 Views

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

106 Common services<br />

ADAN DATA SAVED<br />

ADAN> end<br />

7 Configure Ethernet and PPP on the system:<br />

The host names (M1ACTIVEIP, M1INACTIVEIP) and IP addresses used in the<br />

following instructions are only examples. Actual host names and IP addresses<br />

should conform to your network plan.<br />

553-3001-330 Standard 3.00 August 2005<br />

In LD 117, configure an IP address on the system:<br />

>LD 117<br />

>NEW HOST M1ACTIVEIP 47.1.1.10<br />

>CHG ELNK ACTIVE M1ACTIVEIP<br />

If you are using a backup (inactive) IP, use LD 117 to configure it as well. This<br />

step does not apply to Meridian 1 PBX 11C Chassis systems.<br />

The backup (inactive) IP is only used when the switch is in split mode.<br />

>NEW HOST M1INACTIVEIP 47.1.1.11<br />

>CHG ELNK INACTIVE M1INACTIVEIP<br />

Configure the subnet mask.<br />

>CHG MASK 255.255.255.0<br />

If you have a default gateway in the network, define the routing table in LD 117.<br />

>LD 117<br />

>NEW ROUTE 47.1.0.0 47.1.1.250<br />

The first four digits define the network IP address. The remaining digits specify<br />

the gateway IP address.<br />

>PRT ROUTE (list the configured routing table)<br />

>ENL ROUTE #, where # is the route number<br />

If desired, you can print all information about route, host, gateway, and related<br />

settings.<br />

The routing table provides the system with the IP address of the gateway server<br />

so the system can send return messages to the gateway for forwarding to the<br />

requesting client.<br />

You can use PRT ROUTE for a list of routes with route numbers.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!