14.12.2012 Views

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

368 Station <strong>Administration</strong><br />

Location<br />

(required)<br />

Terminal<br />

Number<br />

Hunt to /<br />

External Hunt<br />

to<br />

Call Forward<br />

NA to / External<br />

Call<br />

ForwardNA to<br />

Add on<br />

Modules<br />

553-3001-330 Standard 3.00 August 2005<br />

The Location is a unique identifying code for this station, up to 12<br />

characters. OTM does not let you assign a code that is already in<br />

use for this site.<br />

Note that if you have not defined DES (OTM data only), then OTM<br />

assigns the first six alphanumeric characters of the Location field<br />

when you synchronize OTM data with the system.<br />

Note also that on receiving data that is not defined in OTM from<br />

the system, the Location field is assigned the full TN value,<br />

including hyphen separators, of the station.<br />

This field contains four separate numeric fields that represent the<br />

system address (the terminal number contains values for Loop,<br />

Shelf, Card and Unit) used by this station.<br />

You can enter a DN in these fields that will receive calls if this<br />

station is busy. Note that you can use any telephone number,<br />

even one that is external to this site. However, you can<br />

double-click this field to display the DN list defined in the<br />

Customer’s Number Plan for this site and choose one of those.<br />

The External Hunt is for incoming calls that are not from a DN in<br />

the Numbering Plan.<br />

You can enter a DN in these fields that will receive calls if there is<br />

no answer at this station after a predetermined number of rings.<br />

These fields operate in the same way as the Hunt to and External<br />

Hunt to fields (see DN Assignment).<br />

Available only for M2000 Series and M3900 Series digital<br />

telephones.You can enter a number in the range 0-2, which<br />

indicates the number of add-on modules attached to the set.<br />

Additional function buttons (for example, Add On 1) may appear<br />

on the dialog box, based on the entry in this field.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!