Suprem III - Stanford Technology CAD Home Page

-57-
Suprem-III User´s Manual
27. Loadfile Statement
----------------------------
The LOADFILE statement is used to input either a new structure to be processed, the physical and model
coefficients to be used by the program, or both.
LOADFILE
FILENAME= ( ALL | COEFFICI | STRUCTUR )
[ FORMATTE ]
Name Type Description
---- ---- -----------
ALL Log Specifies that both the structure information and the model coefficients
are to be input from the specified file.
(unit: )
(default: false.)
(synonym: )
COEFFICI Log Specifies that the coefficient information is to be input from the specified
file.
(unit: )
(default: false.)
(synonym: )
FILENAME Char The name of the file from which the specified information is to be read.
(unit: )
(default: )
(synonym: NAME)
FORMATTE Log Specifies that the information in the file is formatted. If not specified
then the information is assumed to be unformatted or binary.
(unit: )
(default: false.)
(synonym: )
STRUCTUR Log Specifies that the information describing the structure is to be input from
the specified file.
(unit: )
(default: false.)
(synonym: )
The LOADFILE statement inputs two classes of information about the process that is to be simulated. The
first class is the physical structure and impurity distributions of the materials to be simulated. This file is used as the
starting point for subsequent processing steps. The other class of information consists of all of the physical and
model parameters or coefficients used by the program.
A LOADFILE statement may appear at any point in a processing sequence after the INITIALIZE statement
and before the STOP statement. If both structure and coefficient information are to be input, it is recommended
that an INITIALIZE statement be used instead of LOADFILE.