Suprem III - Stanford Technology CAD Home Page

-58-
Suprem-III User´s Manual
28. Lpplot Statement
--------------------------
The LPPLOT statement outputs a semi-logarithmic plot of the specified impurity concentrations versus
depth into the structure to the output using the standard character set. This type of plotting is suitable for non-graphics
terminals and line printers.
PLOT
[ ACTIVE ] [ CHEMICAL ] [ TOTAL ] [ NET ]
[ ANTIMONY ] [ ARSENIC ] [ BORON ] [ PHOSPHOR ]
[ XMIN= ] [ XMAX= ] [ CMIN= ] [ CMAX= ]
[ LINES/PA= ] [ COLUMNS= ]
Name Type Description
---- ---- -----------
ACTIVE Log Specifies that the electrically active concentrations of the specified impurities
are to be plotted.
(unit: )
(default: false.)
(synonym: )
ANTIMONY Log Specifies that the antimony concentration, either active and/or chemical,
is to be plotted.
(unit: )
(default: false.)
(synonym: SB)
ARSENIC Log Specifies that the arsenic concentration, either active and/or chemical, is
to be plotted.
(unit: )
(default: false.)
(synonym: AS)
BORON Log Specifies that the boron concentration, either active and/or chemical, is to
be plotted.
(unit: )
(default: false.)
(synonym: )
CHEMICAL Log Specifies that the chemical concentration of the specified impurities are
to be plotted.
(unit: )
(default: false.)
(synonym: )
COLUMNS Num The number of character columns of the output device.
(unit: columns)
(default: 80)
(synonym: )
CMAX Num The maximum concentration value plotted.
(unit: atoms/cmˆ3.)
(default: 1x10ˆ21)
(synonym: )