Suprem III - Stanford Technology CAD Home Page

-83-
Suprem-III User´s Manual
(synonym: )
PHOSPHOR Log Specifies that the phosphorus concentration, either active and/or chemical,
is to be plotted.
(unit: )
(default: false.)
(synonym: )
TITLE Log Specifies the title string to be plotted at the top of the the plotted structure.
(unit: )
(default: Suprem-III-8628)
(synonym: )
TOTAL Log Specifies that the sum of the active or chemical impurity concentrations
present in the structure is to be plotted.
(unit: )
(default: false.)
(synonym: )
XMAX Num The distance from the top of the plotted layers to the point where the last
concentration is to be plotted.
(unit: microns.)
(default: The current total width of the plotted layers.)
(synonym: )
XMIN Num The distance from the top of the plotted layers to the point where the first
concentration is to be plotted.
(unit: microns.)
(default: 0.0)
(synonym: )
XOFFSET Num The distance that the plot is to be offset from the origin of the plot device
in the horizontal direction. The value should be normalized to the horizontal
width of the plot field with a value between 0 and 1.
(unit: )
(default: 0.0)
(synonym: )
XPWIDTH Num The plot width (horizontal direction). This is normalized to the total
width of the plot device and should therefore have a value between 0
and 1.
(unit: )
(default: 1.0)
(synonym: )
YOFSET Num The distance that the plot is to be offset from the origin of the plot device
in the vertical direction. The value should be normalized to the vertical
height of the plot field with a value between 0 and 1.
(unit: )
(default: 1.0)
(synonym: )
YPWIDTH Num The plot height (vertical direction). This is normalized to the total height
of the plot device and should therefore have a value between 0 and 1.
(unit: )
(default: 1.0.)
(synonym: )