SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System December 2011
2.3 EXTERIOR GYPSUM BOARD FOR CEILINGS
A. Glass-Mat Gypsum Sheathing Board: ASTM C 1177/C 1177M, with fiberglass mat laminated
to both sides and with manufacturer’s standard edges.
1. Products: Subject to compliance with requirements, available products that may be
incorporated into the Work include, but are not limited to, the following:
a. CertainTeed Corp.; GlasRoc Sheathing.
b. Georgia-Pacific Gypsum LLC; Dens-Glass Gold.
c. National Gypsum Company; Gold Bond, e(2)XP.
d. USG Corporation; Securock Glass Mat Sheathing.
2. Core: 1/2 inch, regular type.
2.4 TRIM ACCESSORIES
A. Interior Trim: ASTM C 1047.
1. Material: Galvanized or aluminum-coated steel sheet, rolled zinc, plastic, or paper-faced
galvanized steel sheet.
2.5 JOINT TREATMENT MATERIALS
A. General: Comply with ASTM C 475.
B. Joint Tape:
1. Interior Gypsum Board: Paper.
C. Joint Compound for Interior Gypsum Board: For each coat use formulation that is compatible
with other compounds applied on previous or for successive coats.
2.6 AUXILIARY MATERIALS
A. Steel Drill Screws: ASTM C 1002, unless otherwise indicated.
2.7 FINISHES
A. Finish: Smooth.
PART 3 - EXECUTION
3.1 APPLYING AND FINISHING PANELS
A. Comply with ASTM C 840.
Contract 44577 KW Annex - Rev. D 44577-CSI-SPEC-001 092900 - 2