SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
b. ECRT-PCV-760 and 766: 80 psig.
c. ECRT-PCV-765: 85 psig.
d. ECRT-PCV-762, 763, and 764: 90 psig.
e. ECRT-PCV-761: 110 psig.
3. Port size:
a. ECRT-PCV-755: 3/8” FNPT.
b. ECRT-PCV-763 and 766: ½” FNPT.
c. ECRT-PCV-761, 762, 763, 764, and 765: 1” FNPT.
B. Basis-of-Design Product: Subject to compliance with requirements contained in Section
012513, Product Substitution Procedures, provide the product indicated on Drawings or a
comparable product, approved by the Buyer, by one of the following:
1. Ingersoll Rand.
2. Nitra Pneumatics
3. Parker Hannifin Company
4. Swagelok Industries, Inc
2.9 QUICK COUPLINGS
A. General Requirements for Quick Couplings: Assembly with locking-mechanism feature for
quick connection and disconnection of compressed-air hose.
B. Automatic-Shutoff Quick Couplings: Straight-through brass body with O-ring or gasket seal
and stainless-steel or nickel-plated-steel operating parts.
1. Body (Socket) End: With O-ring or gasket seal, without valve, and with tube
compression fitting inlet for attaching hose or with integral hose.
2. Stem (Plug) End: With tube compression fitting for attaching hose or integral with hose.
3. Seal: Fluorocarbon FKM
C. Valve-less Quick Couplings: Straight-through brass body with stainless-steel or nickel-platedsteel
operating parts.
1. Socket End: With O-ring or gasket seal, without valve, and with barbed inlet for
attaching hose.
2. Plug End: With barbed outlet for attaching hose.
Contract 44577 KW Annex – Rev. E 44577-CSI-SPEC-001 221513 - 18