SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
D. Piping Material Certification: Signed by Seller certifying that piping materials comply with
ASME B31.3 requirements.
E. Certificates of Shop Inspection and Data Report for piping: As required by ASME B31.3 and
that the piping has been designed, manufactured and constructed in accordance with the Seller’s
QA plan.
F. Weld Inspection Reports
The Seller shall prepare and submit weld Inspection reports that include the following information:
1. Weld Map identifying weld numbers showing relative positions of pressure containing
welds and attachment welds to pressure retaining components; do not reuse weld numbers.
If a weld is completely replaced, assign a new number,
2. Weld procedures utilized,
3. Procedure qualification records (PQR) number,
4. Acceptance criteria,
5. Fit-up inspection (if required),
6. Welder identification number,
7. Filler metal heat/lot number,
8. Base material heat number,
9. Nondestructive examination (NDE) methods and results,
10. Inspector Identification (signature or stamp and date),
11. All weld repairs shall be documented in an NCR. The NCR disposition shall be approved
by the Buyer.
G. Field quality-control test reports.
H. Operation and Maintenance Data: For Compressed Air piping specialties to include in
emergency, operation, and maintenance manuals.
I. The final data package shall include at a minimum:
1. Completed shop travelers,
2. Certified Material test reports for base materials and filler materials (CMTR’s),
3. Inspection and test reports.
Contract 44577 KW Annex – Rev. E 44577-CSI-SPEC-001 221513 - 3