SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
1.8 COORDINATION
A. Coordinate interfacing service connections with other service connections.
1. Process systems service connections are specified in Section 011100, Statement of Work.
2. General requirements for Instrumentation installations are specified in Section 220519,
Meters and Gauges for Plumbing Piping.
3. General requirements for Electrical power connections are specified in Section 260519,
Low-Voltage Electrical Power Conductors and Cables.
1.9 EXTRA MATERIALS
A. Furnish extra materials described below that match products installed and that are packaged
with protective covering for storage and identified with labels describing contents.
1. One set of tools required for installation and maintenance.
1.10 DELIVERY, STORAGE AND HANDLING
A. See Section 016600, Material and Equipment Storage, and Handling, for general delivery storage
and handling requirements.
B. Individual pipe spools that are delivered to the fabrication site shall be cleaned in accordance
with Part 3.1.A and capped with chloride/halogen free plastic caps.
C. Pipe spools and valves shall be labeled with the full fill line numbers or valve numbers in accordance
with Section 220553, Identification for Plumbing Piping and Equipment.
PART 2 - PRODUCTS
2.1 PIPES, TUBES, AND FITTINGS
A. Stainless Steel Pipe and Fittings: Schedule 40S, ASTM A 312/A 312M, Grade TP316L or
TP304L, unless otherwise indicated; seamless pipe and ASTM A 403/A 403M, Class S,
seamless fittings matching pipe thickness and grade, for welded joints. Piping shall be restricted
to 1-in. and larger.
B. Stainless steel certified material is:
1. L-Grade material supplied with CMTR’s
2. Tested with both ASTM A262 Practice A and Practice C.
Contract 44577 KW Annex – Rev E. 44577-CSI-SPEC-001 402319-9