SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
12. Ends: Class 150, raised face flanged,
13. Body Size: 2-inches,
14. Orifice size: 1-3/16 inch,
15. Vacuum Control Pressure Range: 1 to 3 inches w.c.,
B. Basis-of-Design Product: Subject to compliance with requirements contained in Section 012513,
Product Substitution procedures, provide the product indicated on Drawings or a comparable
product, approved by the Buyer, by one of the following:
1. Emerson Process Management, Fisher Controls Division.
2.8 QUICK COUPLINGS
A. General Requirements for Quick Couplings: Assembly with locking-mechanism feature for quick
connection and disconnection of compressed-air hose.
B. Automatic-Shutoff Quick Couplings: Straight-through brass body with O-ring or gasket seal and
stainless-steel or nickel-plated-steel operating parts.
1. Body (Socket) End: With O-ring or gasket seal, without valve, and with tube
compression fitting inlet for attaching hose or with integral hose.
2. Stem (Plug) End: With tube compression fitting for attaching hose or integral with hose.
3. Seal: Fluorocarbon FKM
C. Valve-less Quick Couplings: Straight-through brass body with stainless-steel or nickel-platedsteel
operating parts.
1. Socket End: With O-ring or gasket seal, without valve, and with barbed inlet for
attaching hose.
2. Plug End: With barbed outlet for attaching hose.
3. Seal: Fluorocarbon FKM
D. Cam and Groove Quick Couplings: Straight-through stainless steel body with stainless-steel or
nickel-plated-steel operating parts.
1. Body (Socket) End: With O-ring or gasket seal, without valve, and with tube
compression fitting inlet for attaching hose or with integral hose.
2. Stem (Plug) End: With tube compression fitting for attaching hose or integral with hose.
3. Seal: PTFE Encapsulated Fluorocarbon.
Contract 44577 KW Annex - Rev. E 44577-CSI-SPEC-001 431510 - 15