SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
1. Body (Socket) End: With O-ring or gasket seal, without valve, and with tube
compression fitting inlet for attaching hose or with integral hose.
2. Stem (Plug) End: With tube compression fitting for attaching hose or integral with hose.
3. Seal: PTFE Encapsulated Fluorocarbon.
E. Basis-of-Design Product: Subject to compliance with requirements contained in Section 012513,
Product Substitution Procedures, provide the product indicated on Drawings or a comparable
product, approved by the Buyer, by one of the following:
1. OPW Engineered System Company (Autolok series),
2. Parker Hannifin Corp.; Fluid Connectors Group; Quick Coupling Div,
3. Staubli International AG (HCB28 series),
4. Swagelok Industries, Inc.
2.13 COMPRESSED GAS MANIFOLD
A. Four station gas manifold for K size gas cylinders.
1. Standard: ASME B31.3, High Pressure category.
2. 5/8 inch OD, 0.065 inch wall, Type 316L stainless steel tubing and socket TIG weld
assembled.
3. Threaded fittings to match standard station valves.
4. NDE per ASME B31.3, and section 1.4.G.
B. Basis-of-Design Product: Subject to compliance with requirements contained in Section 012513,
Product Substitution Procedures, provide the product indicated on Drawings or a comparable
product, approved by the Buyer, by one of the following:
1. Air Liquide, Inc.
2. Advanced Specialty Gas Equipment (ASGE).
3. Swagelok Industries, Inc.
2.14 COMPRESSED GAS CYLINDER SAFETY CAPS
A. Safety Caps for K size gas cylinders.
1. Code: OSHA lockout/tagout regulation 29 CFR 1910.147
Contract 44577 KW Annex - Rev. E 44577-CSI-SPEC-001 226313 - 20