SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
F. Seller shall select fasteners where they are not specifically called out in this Specification using
the following guidance:
1. Stainless-steel bolts, nuts, and washers shall be used when the mating parts are stainless
steel,
2. Carbon-steel bolts, nuts, and washers shall be used where mating parts are not stainless
steel, and
3. Anti-galling compound (e.g., Loctite Anti-Seize ® ) shall be applied where stainless steel
bolts are used, except if Nitronic 60 materials are used.
G. All fasteners used for structural and pressure boundary applications shall be provided with
CMTRs. All remaining fasteners shall be provided with a manufacture’s Certificate of
Conformance.
2.12 JOINING MATERIALS
A. Pipe-Flange Gasket Materials: Suitable for compressed air and thermal conditions of
compressed air piping system contents.
1. ASME B16.21, nonmetallic, flat, asbestos free, 1/8-inch maximum thickness unless
thickness or specific material is indicated.
a. Narrow-Face Type: For raised-face, Class 150, for carbon steel or stainless steel
flanges.
b. Garlock "BLUE-GARD" 3000 series, 1/8-inch thick compressed gaskets with
dimensions conforming to ASME B16.21 Table 1-5.
B. Flange Bolts and Nuts: ASME B18.2.1, carbon steel for carbon steel flanges or stainless steel
for stainless steel flanges, unless otherwise indicated.
C. Threaded Pipe Joint Tape: PTFE (Red type Teflon tape on all joints ½" diameter or greater).
D. Threaded Stainless Steel Joint Anti-Seize Compound: Loctite N-5000 or N-7000 High Purity
Anti-Seize or Buyer reviewed substitute.
2.13 STRUCTURAL MATERIALS
A. Carbon steel shall meet the requirements of ASTM A 36/A 36M or ASTM A 992/A 992M.
B. Structural tubing shall meet the requirements of ASTM A 500/A 500M, Grade B (fy = 46 ksi).
C. Steel pipe shall meet the requirements of ASTM A 53/A 53M, black steel, Type E or S, Grade
B, or ASTM A 106/A 106M, Grade B, standard weight, Schedule 40 and Schedule 80.
Contract 44577 KW Annex – Rev. E 44577-CSI-SPEC-001 221513 - 21