SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
7. Proof Pressure Test per RMA IP-2 and ASTM D 380 (sections 14, 15 and 17), test pressure
shall be 50% of the minimum specified burst pressure, held for a minimum of 10
minutes.
B. Basis-of-Design Product: Subject to compliance with requirements contained in Section
012513, Product Substitution Procedures, provide the product indicated on Drawings or a
comparable product, approved by the Buyer, by one of the following:
1. Flex-Hose Co., Inc.
2. Flexicraft (Hosecraft Industries, Inc).
3. Hosexpress
4. Hyspan Precision Products, Inc.
5. Mercer Rubber Co.
6. Metraflex, Inc.
7. Proco Products, Inc.
8. Pureflex, Inc.
9. River Bend Hose Specialty.
10. Swagelok Industries, Inc.
11. Unaflex, Inc.
12. US Hose Corp.
2.4 BALL VALVES
A. Description; Ball Valves, NPS 3 and Smaller:
1. Standard: MSS SP-72, or MSS SP-110, and ASME B 16.34,
2. Pressure Rating: Class 150,
3. Body Design: 3 piece,
4. Body/End Cap Material: stainless-steel, ASTM A 351 Grade CF8M,
5. Port: full-port
6. Ball: stainless-steel,
7. Stem: stainless-steel,
Contract 44577 KW Annex – Rev E. 44577-CSI-SPEC-001 402319-12