SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
B. Basis-of-Design Product: Subject to compliance with requirements contained in Section
012513, Product Substitution Procedures, provide the product indicated on Drawings or a
comparable product, approved by the Buyer, by one of the following:
1. Flex-Hose Co., Inc.
2. Flexicraft (Hosecraft Industries, Inc).
3. Hosexpress
4. Hyspan Precision Products, Inc.
5. Mercer Rubber Co.
6. Metraflex, Inc.
7. Proco Products, Inc.
8. River Bend Hose Specialty
9. Swagelok Industries, Inc
10. Unaflex, Inc.
11. Universal Metal Hose; a Hyspan Company
12. US Hose Corp.
2.4 STAINLESS-STEEL FLEXIBLE HOSE
A. Flex Line: Corrugated-stainless-steel tubing with stainless-steel wire-braid covering and ends
welded to inner tubing. See pipe codes in subsection 3.10.
1. Body: Stainless-steel corrugations with woven, flexible, stainless steel, wire-reinforcing
protective jacket.
2. End Connections: As Scheduled on Drawings.
3. CWP Rating: 200 psig, minimum (low pressure system), 3000 psig, minimum (high
pressure system).
4. Operating Temperature: 100 deg F, maximum.
5. Leak Test per RMA IP-2 and ASTM D 380 (sections 14.2 and 15.2), test pressure shall
be 10 to 15 psig, held for a minimum of 10 minutes.
6. Proof Pressure Test per RMA IP-2 and ASTM D 380 (sections 14, 15 and 17), test pressure
shall be 50% of the minimum specified burst pressure, held for a minimum of 10
minutes.
Contract 44577 KW Annex - Rev. E 44577-CSI-SPEC-001 226313 - 13