SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
Valves
3 x pipe nominal outside diameter.
Mechanical Joints: 304L or 316L
SST Flareless type, “Crawford”,
"Swagelok", "Parker" or approved
equal in accordance with ASTM A
182/A 182M A 276 or SA 479.
ASME B16.34, stainless steel body, stainless steel ball with fractional
tube ends, UHMWPE seats. Manual locking handle.
Note:
1) Based on 65 °F winter and 80 °F summer inside HVAC design temperatures.
2) Standards referenced above shall be used unless approved by buyer.
Design Pressure 100 psig
PIPING CODE H-1: Hoses
Test Pressure 50% of the minimum specified burst pressure
Operating Temperature
Sizes 1/4" NPS and larger
Environmental Extremes: -27°F to 110°F for outside applications
Normal Operating Extremes: 65°F to 80°F (Note 1)
Hose RMA IP-2, Hose Handbook, ASTM D 380
Fittings
Autolok TM quick couplings, made by the OPW Company, 300 Series SST,
Threaded or Welded as specified on fabrication drawings. Size and type as
specified on the fabrication drawings.
Campbell Chemjoint TM size and type as specified on the fabrication drawings.
River Bend Hose Fittings, size and type as specified on the fabrication drawings.
Staubli HCB28 series, size and type as specified on the fabrication drawings.
Swagelok, size and type as specified on the fabrication drawings.
Note:
1) Based on 65°F winter and 80°F summer inside HVAC design temperatures.
2) Standards referenced above shall be used unless approved by buyer.
3) AUTOLOK is a registered trademark of Delaware Capital Formation, Inc., Wilmington, Delaware.
4) Chemjoint is a registered trademark of Campbell Fittings, Inc., Boyertown Pennsylvania.
Contract 44577 KW Annex - Rev. E 44577-CSI-SPEC-001 226313 - 32