01.10.2013 Views

SECTION 033000 - CAST-IN-PLACE CONCRETE

SECTION 033000 - CAST-IN-PLACE CONCRETE

SECTION 033000 - CAST-IN-PLACE CONCRETE

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Sludge Treatment Project Engineered Container Retrieval and Transfer System December 2011<br />

F. Specifications: include compliance information with The National (DOE) Efficiency Standard,<br />

and any exceptions taken, prior to manufacturing.<br />

G. Material Safety Data Sheet (MSDS) for insulating fluid.<br />

H. Operation and Maintenance Data: Installation instruction manual and maintenance instruction<br />

manuals.<br />

1.5 QUALITY ASSURANCE<br />

A. Testing Agency Qualifications: An independent testing agency, with the experience and<br />

capability to conduct the testing indicated, that is a member company of the InterNational<br />

Electrical Testing Association or is a nationally recognized testing laboratory (NRTL) as<br />

defined by OSHA in 29 CFR 1910.7, and that is acceptable to authorities having jurisdiction.<br />

1. Testing Agency's Field Supervisor: Person currently certified by the InterNational<br />

Electrical Testing Association or the National Institute for Certification in Engineering<br />

Technologies to supervise on-site testing specified in Part 3.<br />

B. Product Options: Drawings indicate size, profiles, and dimensional requirements of<br />

transformers and are based on the specific system indicated. Refer to Division 01 Section<br />

"Product Requirements."<br />

C. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70,<br />

Article 100, by a testing agency acceptable to authorities having jurisdiction, and marked for<br />

intended use.<br />

D. Comply with IEEE C2.<br />

E. Comply with ANSI C57.12.10, ANSI C57.12.28, IEEE C57.12.70, and IEEE C57.12.80.<br />

F. Comply with NFPA 70.<br />

G. Perform testing in accordance with ANSI C57.12.00, Section 8.<br />

1.6 DELIVERY, STORAGE, AND HANDL<strong>IN</strong>G<br />

A. Packaging shall be of such to eliminate ingress of water and other contaminants. Items that<br />

could be damaged during shipment shall be removed and placed in separate packing. If left<br />

attached, items are to be protected.<br />

B. Handle using lifting eyes provided. Keep transformer in upright position.<br />

1.7 PROJECT CONDITIONS<br />

A. Service Conditions: IEEE C37.121, usual service conditions except for the following:<br />

1. Exposure to significant solar radiation.<br />

Contract 44577 KW Annex – Rev. D 44577-CSI-SPEC-001 261200 - 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!