SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System December 2011
SECTION 331116 - FACILITY WATER DISTRIBUTION PIPING
PART 1 - GENERAL
1.1 SUMMARY
A. This Section includes water-distribution piping and related components outside the building for
fire-service mains.
1.2 SUBMITTALS
A. Product Data: For each type of product indicated.
B. Field quality-control and pressure test reports.
C. Cleaning reports.
D. Operation and maintenance data.
1.3 QUALITY ASSURANCE
A. Regulatory Requirements:
1. Comply with standards of authorities having jurisdiction for fire-suppression waterservice
piping, including materials, hose threads, installation, and testing.
B. Piping materials shall bear label, stamp, or other markings of specified testing agency.
C. Comply with FMG's “Approval Guide” or UL's “Fire Protection Equipment Directory” for fireservice-main
products.
D. NFPA Compliance: Comply with NFPA 24 for materials, installations, tests, flushing, and
valve and hydrant supervision for fire-service-main piping for fire suppression.
1.4 PROJECT CONDITIONS
A. Interruption of Existing Water-Distribution Service: Do not interrupt service to facilities
occupied by Owner or others unless permitted under the following conditions:
1. Notify the Buyer’s Technical Representative no fewer than five (5) days in advance of
proposed interruption of service.
2. Do not proceed with interruption of water-distribution service without written permission
from Buyer’s Technical Representative.
Contract 44577 KW Annex - Rev. D 44577-CSI-SPEC-001 331116 - 1