SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System December 2011
SECTION 321216 - ASPHALT PAVING
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes:
1. Hot-mix asphalt paving.
B. Related Sections:
1. Division 31 Section “Earth Moving” for aggregate subbase and base courses and for
aggregate pavement shoulders.
1.2 SUBMITTALS
A. Product Data: For each type of product indicated. Include technical data and tested physical
and performance properties.
1. Job-Mix Designs: Certification, by authorities having jurisdiction, of approval of each
job mix proposed for the Work.
2. Job-Mix Designs: For each job mix proposed for the Work.
3. Herbicide product information and application recommendations.
4. Material Certificates: For each paving material, from manufacturer.
B. Testing Agency Qualifications
C. Field quality control reports.
1. Batch ticket from each truck delivery showing conformance to the approved job mix.
2. Temperature records for ambient, subgrade and paving material taken in field.
3. In place material compaction test reports.
1.3 QUALITY ASSURANCE
A. Manufacturer Qualifications: A paving-mix manufacturer registered with WSDOT and
approved by Buyer’s Technical Representative.
B. Regulatory Requirements: Comply with materials, workmanship, and other applicable
requirements of 2010 Standard Specification M41-10 of WSDOT for asphalt paving work.
1. Measurement and payment provisions and safety program submittals included in
WSDOT standard specifications; do not apply to this Section.
2. Requirements set forth in this specification shall govern over requirements of WSDOT
specifications.
C. Preinstallation Conference: Conduct conference at Project site.
Contract 44577 KW Annex - Rev. D 44577-CSI-SPEC-001 321216 - 1