SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System December 2011
1.5 QUALITY ASSURANCE
A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70,
by a qualified testing agency, and marked for intended location and application.
B. Comply with NFPA 70.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Store, protect, and handle all radiation instrumentation according to manufacturer’s instructions.
1.7 PROJECT CONDITIONS
A. Do not deliver or install equipment until spaces are enclosed and weathertight, wet work in
spaces is complete and dry, work above equipment is complete, and temporary HVAC system is
operating and maintaining ambient temperature and humidity conditions at occupancy levels
during the remainder of the construction period.
1.8 COORDINATION
A. Coordinate layout and installation of radiation detection equipment with other construction,
including electrical and other types of equipment, raceways, piping, encumbrances to
workspace clearance requirements, and adjacent surfaces. Maintain required workspace
clearances and required clearances for equipment access doors and panels.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. GFE Equipment: Eberline/Thermo
1. Alpha Continuous Air Monitors: Alpha 6A-1
2. Beta Continuous Air Monitors: AMS-4
3. Area Radiation Monitors: Alpha EC4-X
4. Personnel Contamination Monitor: APCM-2 Half Body Counter
5. Hand and Foot Monitor: HFM-6
PART 3 - EXECUTION
3.1 INSTALLATION
A. Install radiation detection equipment and accessories according to manufacturer’s instructions.
B. Comply with mounting and anchoring requirements specified in Division 26 Section "Vibration
and Seismic Controls for Electrical Systems.”
Contract 44577 KW Annex – Rev. D 44577-CSI-SPEC-001 283233 - 2