SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
5. Elastomeric flexible hose (larger than 1”)
6. Ball valves.
7. Check valves.
8. Needle valves.
9. Safety valves (ECRT-PSV-601 and ECRT-PSV-611).
10. Pressure control valves.
11. Flow orifices (ECRT-FO-601 and ECRT-FO-602).
12. Quick couplings.
13. Compressed gas manifold.
14. Compressed gas cylinder safety caps.
15. Compressed gas cylinder storage racks.
16. Welding materials.
17. Fasteners.
18. Joining materials.
C. Fabrication Drawings: Piping Isometrics, Plans and Elevations.
D. Piping Material Certification: Signed by Seller certifying that piping materials comply with
ASME B31.3 requirements.
E. Certificates of Shop Inspection and Data Report for piping: As required by ASME B31.3 and that
the piping has been designed, manufactured and constructed in accordance with the Seller’s QA
plan.
F. Weld Inspection Reports
The Seller shall prepare and submit weld Inspection reports that include the following information:
1. Weld Map identifying weld numbers showing relative positions of pressure containing
welds and attachment welds to pressure retaining components; do not reuse weld numbers.
If a weld is completely replaced, assign a new number,
2. Weld procedures utilized,
3. Procedure qualification records (PQR) number,
Contract 44577 KW Annex - Rev. E 44577-CSI-SPEC-001 226313 - 3