SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
8. Closed copies of Non-Conformance Reports (NCRs) dispositioned accept–as-is, repair,
reject or rework.
9. Critical dimension verification for external interfaces.
10. Bending procedures and bend qualification records.
11. Calibration reports.
12. Certificates of calibration.
13. Fastener torque completion reports.
14. Field quality-control test reports.
15. Commercial Grade Item (CGI) dedication packages (if required by the Statement of
Work).
1.4 QUALITY ASSURANCE
A. Work identified in this section shall be done under a Quality Assurance program in accordance
with ASME NQA-1, as approved by the Owner and described in Section 014000, Quality
Assurance and Control.
B. The highest functional classification for the scope of this Specification section is classified as
Safety Significant.
C. Quality levels are defined on the associated line lists, valve lists and datasheets accompanying this
section.
D. Welding/Brazing: Qualify processes and operators according to ASME Boiler and Pressure
Vessel Code: Section IX, "Welding and Brazing Qualifications" or AWS B2.2/B2.1M, "Standard
for Brazing Procedure and Performance Qualification."
E. Comply with provisions in ASME B31 Series, "Code for Pressure Piping."
F. Certify that each welder has passed AWS qualification tests for welding processes involved and
that certification is current.
G. Examination Requirements for ASME B31.3, Pipe Welding:
1. Perform a visual examination of the weld joint fit-up of welds (the 5% specified by
ASME B31.3) to assure, at a minimum, that markings and certifications of base materials
and filler materials are in accordance with specified requirements, the base metals are of
specified thicknesses and types, materials are free from contaminants, fit-up meets the
joint detail for the welding procedure specification, the weld purge is set up properly and
exit gas is being analyzed, and the welder is qualified to make the weld.
Contract 44577 KW Annex - Rev. E 44577-CSI-SPEC-001 431510 - 4