SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
3.10 PIPE CODES
PIPING CODE: P-2 Fire Water Drain Piping (Gravity)
Design Pressure 10 foot head of water
Test Pressure 10-foot head of water
Operating Temperature
Inspection and Test
Method
Sizes 12” Pipe and smaller
Tubing/Pipe
Fittings
Valves As shown on Drawings.
Environmental Extremes: -27°F to 110°F
Normal Operating Extremes: 30°F to 80°F (Note 1)
Visual Examination
Hydrostatic testing at 10 foot of head water for all tubing and piping
Solid Wall PVC Pipe: Schedule 40 PVC, ASTM D 2665, drain, waste, and
vent piping solvent joints.
PVC Socket fittings: ASTM D 2665, made to ASMT D 3311, drain, waste,
and vent patterns and to fit schedule 40 pipe.
Note:
1) Based on 30°F winter and 80°F summer approximate ground temperature.
2) Standards referenced above shall be used unless approved by buyer.
Contract 44577 KW Annex - Rev. E 44577-CSI-SPEC-001 221413 - 12