SECTION 033000 - CAST-IN-PLACE CONCRETE

Sludge Treatment Project Engineered Container Retrieval and Transfer System January 2012
B. Basis-of-Design Product: Subject to compliance with requirements contained in Section
012513, Product Substitution Procedures, provide the product indicated on Drawings or a
comparable product, approved by the Buyer, by one of the following:
1. Flex-Hose Co., Inc.
2. Flexicraft (Hosecraft Industries, Inc).
3. Hosexpress
4. Hyspan Precision Products, Inc.
5. Mercer Rubber Co.
6. Metraflex, Inc.
7. Proco Products, Inc.
8. River Bend Hose Specialty
9. Swagelok Industries, Inc
10. Unaflex, Inc.
11. Universal Metal Hose; a Hyspan Company
12. US Hose Corp.
2.3 ELASTOMERIC FLEXIBLE HOSE (LARGER THAN 1”)
A. Flex Line: Reinforced EPDM, PTFE or FEP elastomeric hose; rated for 150-psig minimum inlet
pressure.
1. Cover: woven, flexible, EPDM, PTFE or FEP, textile plies and helical wire reinforcing,
smooth protective jacket (silicone or polyolefin).
2. Core: smooth bore FEP, reinforced with multi-layer rubber, spiral wound polyester cords
and a double helix wire.
3. End Connections: As Scheduled on Drawings.
4. CWP Rating: 150 psig, minimum.
5. Operating Temperature: 100 deg F, maximum
6. Leak Test per RMA IP-2 and ASTM D 380 (sections 14.2 and 15.2), test pressure shall
be 10 to 15 psig, held for a minimum of 10 minutes.
Contract 44577 KW Annex – Rev E. 44577-CSI-SPEC-001 402319-11