Protege System Controller Reference Manual
Protege System Controller Reference Manual
Protege System Controller Reference Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Trouble Zone First Area Assignment<br />
The trouble zone must be assigned to an area for it to perform any function in the system. By default ALL<br />
trouble zones are assigned to the predefined trouble area which is the last programmable area in the system. A<br />
trouble zone can be assigned in up to 4 different areas. A trouble zone can perform a different function in each<br />
area.<br />
CP001:01 Area 1<br />
Trouble Area<br />
Use the [1] and [3] keys to scroll the available areas that can be assigned to the trouble zone. For more<br />
information about the list control data entry refer to the section List Control Data Entry (see page 344).<br />
Trouble Zone Type First Area Assignment<br />
When a trouble zone is assigned to an area the zone must be programmed with the type of trouble zone<br />
(Trouble Silent, Trouble Bell etc).<br />
CP001:01 Type 1<br />
Trouble Silent<br />
Use the [1] and [3] keys to scroll the available zone types that can be assigned to the trouble zone. For more<br />
information about the list control data entry refer to the section List Control Data Entry (see page 344).<br />
Trouble Zone Second Area Assignment<br />
The trouble zone must be assigned to an area for it to perform any function in the system. By default ALL<br />
trouble zones are assigned to the predefined trouble area which is the last programmable area in the system. A<br />
trouble zone can be assigned in up to 4 different areas. A trouble zone can perform a different function in each<br />
area.<br />
CP001:01 Area 2<br />
None<br />
Use the [1] and [3] keys to scroll the available areas that can be assigned to the trouble zone. For more<br />
information about the list control data entry refer to the section List Control Data Entry (see page 344).<br />
Trouble Zone Type Second Area Assignment<br />
When a trouble zone is assigned to an area the zone must be programmed with the type of trouble zone<br />
(Trouble Silent, Trouble Bell etc).<br />
CP001:01 Type 2<br />
None<br />
Use the [1] and [3] keys to scroll the available zone types that can be assigned to the trouble zone. For more<br />
information about the list control data entry refer to the section List Control Data Entry (see page 344).<br />
Trouble Zone Third Area Assignment<br />
The trouble zone must be assigned to an area for it to perform any function in the system. By default ALL<br />
trouble zones are assigned to the predefined trouble area which is the last programmable area in the system. A<br />
trouble zone can be assigned in up to 4 different areas. A trouble zone can perform a different function in each<br />
area.<br />
CP001:01 Area 3<br />
None<br />
Use the [1] and [3] keys to scroll the available areas that can be assigned to the trouble zone. For more<br />
information about the list control data entry refer to the section List Control Data Entry (see page 344).<br />
100 PRT-CTRL-SE <strong>Protege</strong> <strong>System</strong> <strong>Controller</strong> <strong>Reference</strong> <strong>Manual</strong> | PRT-CTRL-SE
Change language