Protege System Controller Reference Manual

Option 7 - Holiday Group Seven
• Enabled the period will operate if a holiday is valid and has the group seven option set.
• Disabled the period will not operate if the holiday group seven is active.
Option 8 - Holiday Group Eight
• Enabled the period will operate if a holiday is valid and has the group eight option set.
• Disabled the period will not operate if the holiday group eight is active.
Period Two to Period Four Configuration
Programming of period two, three and four is identical to period one.
Holidays
To access holiday programming, login using a valid code that has access to the holiday programming menu and
then select [MENU, 6, 3]. The screen will then prompt you to "Select a holiday to modify" requesting that you
enter a holiday number. Type the appropriate 3-digit holiday number or use the [] and [] keys to scroll the
available holidays. When the desired holiday number appears on the screen, press [ENTER] to program the
selected holiday. The maximum number of holidays that can be programmed is limited by your system's
memory and configured profile.
To browse the holidays by name press [ENTER] when prompted for a holiday number to modify and then use
the [] and [] keys to scroll the available holidays by their name.
Holiday to
modify: HL001
Every time you press the Enter key, the next screen appears. The different screens are described in the
following sub-sections. Programming the holiday settings in the Protege System allow you to prevent schedules
from operating on a public holiday or pre-defined holidays.
Selecting Holiday to Modify
Each holiday entry is assigned a unique holiday number from 001 to 250.
Holiday to
modify: HL001
Type the appropriate 3-digit holiday number or use the [] and [] keys to scroll the available holiday entries.
When the desired holiday number appears on the screen, press [ENTER] to program the selected holiday entry.
The maximum number of holidays that can be programmed is limited by your system's memory and configured
profile.
Holiday Name
If the selected holiday entry has a name associated (some holiday entries may not have a name associated with
them) the name programming screen will be shown.
HL001 Name
*Holiday 001
To scroll holiday entries by name use the [] and [] keys. To modify or enter a new name for the selected
holiday item use the keypad as explained in section Entering Text and Names (see page 341) and press
[ENTER].
By default the holiday name will be prefixed by an '*' this indicates that the name is an editable name in the
system.
284 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE