Protege System Controller Reference Manual

Data Register Definitions
Memory registers are locations of memory that can be used to store information, calculate information or
provide links to the analog values from the PRT-ADC4 and PRT-DAC4 analog control modules. Memory
registers can be used as part of programmable functions to perform actions and calculations and are access
either in a Boolean Mode (Bits) or Data Mode (Word Value).
A memory register can refer to a decimal value from 0-65,535. When used in programmable functions a
memory register will hold either a 0 or 1 in the appropriate bit or a value from 0-65,535.
Read/Write Memory Registers
Read and write general memory registers can be used to perform logic actions or other functions and are global
throughout the Protege system controller.
Memory
Register Description Type
MR00000
General Purpose Memory Register MR00000 can be used
in any location.
| | | | |
|
MR00250
General Purpose Memory Register MR00250 can be used
in any location.
Boolean Values 0 and 1 and
decimal values up to
4,294,836,225.
| | |
Boolean Values 0 and 1 and
decimal values up to
4,294,836,225.
338 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE