Protege System Controller Reference Manual

• This option will not operate unless the menu group also has the installer option enabled in the main menu
options.
• Disabled the menu group will not allow access to the advanced sub menus.
Option 2 - Time Sub Menu
• Enabled the menu group will allow a user access to the time sub menus that allow configuration of
schedules and daylight saving settings. The menu group must also have the main time menu option
enabled.
• Disabled the menu group will not allow access to the user programming menu.
Option 3 - Bypass Trouble Zone Sub Menu
• Enabled the menu group will allow a user access to the bypass sub menu for the control of trouble zones
[MENU, 7, 2]. The menu group must also have the bypass menu option enabled in the main menu options
for this to operate correctly.
• Bypassing trouble zones is not recommended unless instructed by an installer.
• Disabled the menu group will not allow access to the trouble zone bypass sub menu.
Option 4 - Area Group Access
• Enabled the menu group will allow a user access to the area group control screen from the area status
display screen. Refer to the Area Group Control Functions (see page 19) .
• Disabled the menu group will not allow access to the area group control screens.
Option 5 - 24HR Processing Access
• When enabled the menu group will allow a user access to the 24HR processing status screen and the
control of the 24HR tamper section of an area. Refer to the 24HR Control Functions (see page 18).
• Disabled the menu group will not allow access to 24HR Processing and Control.
Option 6 - Stay Arming
• When enabled the menu group will allow a user to stay arm an area. The area must also have the stay
arming option enabled.
• Disabled the menu group will not allow area stay arming.
Option 7 - Force Arming
• When enabled the menu group will allow a user to force arm an area. The area must also have the force
arming option enabled.
• Disabled the menu group will not allow force arming.
Option 8 - Instant Arming
• When enabled the menu group will allow a user to instant arm an area. The area must also have the instant
arming option enabled.
• Disabled the menu group will not allow instant arming.
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 33