Protege System Controller Reference Manual

Virtual Door Miscellaneous Options
These options are for the virtual door.
Option 1 – Alarm on Door Left Open
• The Alarm PGM will be activated when the door is left open beyond the Max Open time.
• The Alarm PGM is not activated.
Option 2 – Pulse Left Open Alarm
• The Alarm PGM will be activated with a pulse time on and off.
• The Alarm PGM will be turned on normally.
Option 3 – Alarm on Door Forced
• The Alarm PGM will be activated when the door is forced open.
• The Alarm PGM is not activated.
Option 4 – Pulse Forced Door Alarm
• The Alarm PGM will be activated with a pulse time on and off.
• The Alarm PGM will be turned on normally.
Option 5 – Log Left Open Zone Event
• Enabled the zone events when the door is left open.
• Disables the zone events from being generated.
Option 6 – Log Forced Zone Event
• Enabled the zone events when the door is forced open.
• Disables the zone events from being generated.
Option 7 and 8 - Reserved
• Reserved do not modify
Enabling/disabling or modifying the settings of reserved options is not recommended.
Zone Follows PGM Function
To program the zone follows pgm function ensure that the function you have selected is halted. Select the
function type selection screen as shown below for Zone Control.
FN001 Func Type
Zone Control
Use the [1] and [3] keys to scroll the function types until you reach the door control selection and press [ENTER]
to select the function type displayed and proceed to the next programmable option for the door control function.
For more information about the list control data entry refer to the section List Control Data Entry (see page 344).
248 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE