Protege System Controller Reference Manual

Selecting an Schedule Entry to Modify
Each schedule entry is assigned a unique schedule number from 001 to 250.
Schedule to
modify: SC001
Type the appropriate 3-digit schedule number or use the [] and [] keys to scroll the available schedule
entries. When the desired schedule number appears on the screen, press [ENTER] to program the selected
schedule entry. The maximum number of schedules that can be programmed is limited by your system's
memory and configured profile.
Schedule Name
If the selected schedule entry has a name associated (some schedule entries may not have a name associated
with them) the name programming screen will be shown.
SC001 Name
*Schedule 001
To scroll schedule entries by name use the [] and [] keys. To modify or enter a new name for the selected
schedule item use the keypad as explained in section Entering Text and Names (see page 341) and press
[ENTER].
By default the schedule name will be prefixed by an '*' this indicates that the name is an editable name in the
system.
Schedule Miscellaneous Options
Miscellaneous options set the way the schedule will operate with the qualification PGM.
SC001 Misc
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 344).
Option 1 - Qualify Schedule if PGM is On.
• Enabled the schedule will only operate if the qualify PGM is on and will be invalidated when the PGM turns
on if it was valid.
• Disabled the option will perform no action on the schedule.
Option 2 - Qualify Schedule if PGM is Off
• Enabled the schedule will only operate if the qualify PGM is OFF and will be invalidated when the PGM turns
off if it was valid.
• Disabled the option will perform no action on the schedule.
Option 3, 4, 5, 6, 7 8 - Reserved
• Reserved do not modify
Enabling/disabling or modifying the settings of reserved options is not recommended.
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 281