Protege System Controller Reference Manual

Option 2 - Invert Door Contacts
• When the option is enabled the door contact input is inverted. This does not affect the zone input
functionality if it is being used.
• Disabled door contact functions normally.
Option 3 - Invert Bond Sensing Input
• Enabled the reader will invert the bond sensing input.
• Disabled bond sensing will operate normally.
Option 4 - Invert Request to Exit Input
• Enabled the reader will invert the request to exit input.
• Disabled REX input will operate normally.
Option 5 - Invert Request to Enter Input
• Enabled the reader will invert the request to enter input.
• Disabled REN input will operate normally.
Option 6 - Request To Exit Operates Always
• Enabled the reader will always allow a request to exit event EVEN if the door is forced open. This will not
restart the forced door or the door alarm operation.
• Disabled REX input will operate only when the door is closed.
Option 7 - Recycle Door Open Too Long Timer On Request To Exit Operation
• Enabled the reader will extend the door open time when the REX is received. The REX must be received
during the normal open time or during the pre-alarm time for the timer to be recycled. Pressing the request
to exit once the door open too long has been entered will require the door to be closed. This option will not
affect the ability for the request to exit action to unlock the door.
• Disabled REX input will not alter the door open time once the door as been opened.
Option 8 - Reserved
• Reserved do not modify
Enabling/disabling or modifying the settings of reserved options is not recommended.
Reader Port 1 Process Options
Options that relate to the extra reader functions.
RD001 R1 Process
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 344).
Option 1 – Convert Force to Door Open
• Enabled the reader expander will process door forced open events as door open events.
• Disabled the reader will process forced door events as normal.
Option 2 – Disable Red LED Processing
• Enabled the reader expander will not control the Red LED (L2) and the PGM can be used for another
function, this is particularly useful if the attached proximity reader LED's is controlled with one wire.
• Disabled the reader will turn on the Red LED when the door is locked.
Option 3 – Disable Green LED Processing
• Enabled the reader expander will not control the Green LED (L1) and the PGM can be used for another
function, this is particularly useful if the attached proximity reader LED's is controlled with one wire.
76 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE