Protege System Controller Reference Manual

Option 4 - Prevent Unlock By Schedule If Inside Area Armed
• Enabled the door will not unlock when the schedule is valid if the inside area is armed. Use this option with
the late open option to prevent false alarms by entry of personal before an area is disarmed. This option
only operates if the option 1 and 2 are not enabled. To prevent unlocking and locking based on schedule
and area status set option 6 and 7 to the required values.
• Disabled the door will unlock normally on schedule.
Option 5 - Prevent Unlock By Schedule If Outside Area Armed
• Enabled the door will not unlock when the schedule is valid if the outside area is armed. Use this option with
the late open option to prevent false alarms by entry of personal before an area is disarmed.
• Disabled the door will unlock normally on schedule.
Option 6 – Area Disarmed AND Schedule Valid Unlock Door
• Enabled the door will unlock if the door unlock schedule is valid "AND" the inside or outside area is
disarmed dependent on the options set for option 4 and 5.
• Disabled the door will perform no AND logic processing for the schedule and area status.
Option 7 - Area Disarmed OR Schedule Valid Unlock Door
• Enabled the door will unlock if the door unlock schedule is valid "OR" the inside or outside area is disarmed
dependent on the options set for option 4 and 5.
If there is no schedule programmed and the door is to follow the area status you must set the OR option to
enable the area status to be processed. You also MUST select an inside or outside area.
• Disabled the door will perform no OR logic processing for the schedule and area status.
Option 8 – Generate REX/REN Access Taken Events
• Enabled the door will generate a Request to Exit (or Enter) event if the door opens while the door is
unlocked from a request to exit. If the door remains closed an Access Not Taken event will be generated
• Disabled no event will be generated.
Extra Options
Extra options include only the user area control option.
DR001 Extra
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 344).
Option 1 - Update User Area When Door Has No Anti Pass Back
• Enabled the door will update the users current area even if the door is not programmed with card anti pass
back. This can be used to keep track of the user's last area that they entered.
• Disabled the users area will not be modified if the door is not programmed for card anti pass back control.
Option 2 – Prevent Request To Exit If Inside Area Armed
• Enabled the door will deny a request to exit when the inside area has been armed to prevent egress from an
armed area.
• Disabled the request to exit operates during any inside area state.
Option 3 – Enable ADA Lock Output
• Enabled the door will multiply the lock output time by two for any user that has been tagged as an ADA
(American Disabilities Act) user allowing an extended amount of time for access and door left open.
• Disabled the ADA option has no affect on the door lock time.
138 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE