Protege System Controller Reference Manual

Selecting an Elevator Group to Modify
Each elevator group is assigned a unique elevator group number from 001 to 250.
Elevator Grp to
modify: EG001
Type the appropriate 3-digit elevator group number or use the [] and [] keys to scroll the available elevator
groups. When the desired elevator group appears on the screen, press [ENTER] to program the selected door
group. The maximum number of elevator groups that can be programmed is limited by your system's memory
and configured profile.
Elevator Group Name
If the selected elevator group has a name associated (some elevator groups do not have a name associated
with them) the name programming screen will be shown.
EG001 Name
All Elevators
To scroll elevator groups by name use the [] and [] keys. To modify or enter a new name for the selected
elevator group use the keypad as explained in section Entering Text and Names (see page 341) and press
[ENTER].
By default the elevator group name will be prefixed by an '*' this indicates that the name is an editable name in
the system.
Operating Schedule
The operating schedule for the elevator group determines when the elevator group is valid and if it will use a
secondary elevator group if the schedule is not valid. A schedule is a series of times and days that can be
programmed to prevent the operating of functions based on a 7 day week and 24 hour clock. For more
information on the programming of the schedule refer to the Schedule Programming section (see page 279).
EG001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the schedule displayed.
For more information about the list control data entry refer to the section List Control Data Entry (see page 344).
Secondary Elevator Group
A secondary elevator group can be selected that will be used when the schedule of the elevator group that is
programmed is not valid. The schedule of the secondary elevator group must be valid or set to none. The
secondary elevator group allows very powerful elevator group controls to be placed on users during certain
times of the day preventing access to certain elevators.
EG001 Secondary
None
Use the [1] and [3] keys to scroll the secondary elevator group selection and press [ENTER] to select the
elevator group displayed. For more information about the list control data entry refer to the section List Control
Data Entry (see page 344). Programming a secondary elevator group that uses the current elevator group being
edited will perform no function.
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 45