Protege System Controller Reference Manual

Door Control and Status Display
Each door will display the status of the door inputs that are controlling the door and the state of the lock output
that is controlled by the door configuration.
*Door 001
(Closed)(Locked)
Use the [] and [] keys to scroll the available doors while in the view screen, press the [1] key to unlock the
door for the programmed unlock time, press the [2] key to lock the door, press the [3] key to activate the door
latched, press the [4] key to change the door lockdown state and press the [5] key to cancel the door
lockdown. Press the [] to return to the Door selection display.
The display will show the door input states listed below.
CLOSED
OPEN
FORCED
PREALM
LEFTOP
Door is closed
Door is open
Door is forced open
Door is in a pre-alarm open condition
Door has been left open
The display will show the door lock states listed below.
LOCKED
ACCESS
SCHED
TIMED
LATCH
ENTRY
EXIT
MENU
AREA
FIRE
LD-ALL
LD-ENT
LD-EXT
LD-E+E
Lock PGM is deactivated
Lock PGM is activated by a user entry
Lock PGM is activated by schedule
Lock PGM is activated for time period by manual control
Lock PGM is activated latched by manual control
Lock PGM is activated request to enter
Lock PGM is activated request to exit
Lock PGM is activated keypad control
Lock PGM is activated by area
Lock PGM is activated by fire control programmable function
Door is in Lockdown and will only unlock for a super user
Door is in Lockdown with Entry Allowed
Door is in Lockdown with Exit Allowed
Door is in Lockdown with Entry and Exit Allowed
Profile Configuration
Profiles configure the local onboard and expanded memory (if it is present) with the number of supported
records (Users, Events, Doors ...). To enter the profile menu select [MENU, 4, 8, 3] you can then scroll the
menu for the available options.
Changing Profiles
To change profiles login using a valid installer code and then select [MENU, 4, 8, 3, 1]. The screen displays
"Select profile" as shown in the following example.
Select profile
Standard
Eight profiles are provided that allow the configuration of numerous record structures and setups, it is also
possible to customize the number of records that the controller will function with by selecting the custom profile.
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 215