Protege System Controller Reference Manual

Monitor Phone Service
To program the monitor phone service ensure that the service that has been selected is halted. Press the
[ENTER] key until the display shows the service type selection screen.
SV001 Ser Type
Monitor Phone
Use the [1] and [3] keys to scroll the service types until you reach the monitor phone selection and press
[ENTER] to select the monitor phone service type displayed and proceed to the next programmable option for
the monitor phone service. For more information about the list control data entry refer to the section List Control
Data Entry (see page 344).
Service Mode
The service mode determines how this service operates with the system controller. By default a service is set to
start with the operating system. Setting a service to Start With The Operating System (Start With O/S) allows the
service to operate automatically, if the system controller is reset or restarts the service will automatically restart
with the operating system. To stop and start the service manually and to prevent the service from restarting
when a reset condition occurs select manual operation.
SV001 Ser Mode
Start with O/S
Use the [1] and [3] keys to scroll the available operating modes and press [ENTER] to select the operating mode
displayed. For more information about the list control data entry refer to the section List Control Data Entry (see
page 344).
Miscellaneous Options
The miscellaneous options allow you to program special functions and features for the monitor phone service.
SV001 Misc
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 344).
Option 1 - Telephone Line Monitoring
• Enabled the service monitor the telephone line for a disconnection or out of tolerance loop value. The TLM
failure will open the phone line trouble zone, for a list of trouble zones refer to the Trouble Zone section (see
page 95).
Only telephone line 1 (T1 and R1) can be monitored for telephone line or loop failures.
• Disabled the service will not monitor the telephone line.
Option 2 - Answer Machine Override
• Enabled the service will use the answer/fax machine override function.
• Disabled the service will answer the line based on the programmed number of rings to answer.
Option 3 - Call Back Security On Connection Request
• Enabled the service will allow a remote communication connection to login and will then call the connecting
party back using the PC phone number programmed in the service.
• Disabled the service will not use call back security.
Option 4 - Call Back On Event Buffer (75%)
• Enabled the service will call the PC phone number programmed in the service when the total number of
events that have not been enabled reaches 75% of the total available events.
• Disabled the service will not call back.
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 161