Protege System Controller Reference Manual

Group
Groups of objects allow you to control multiple objects in the Protege System. Groups include PGM and
Keypad Groups. To go to the groups sub menu select [MENU, 4, 6]. You can then select from the PGM Group
or Keypad Group menu or scroll the menu using the [] and [] keys.
PGM Group
To access the PGM group programming login using a valid installer code and then select [MENU, 4, 6, 2]. The
screen displays "PGM Group to modify" as shown in the following example.
PGM groups allow you to control multiple PGM outputs from one PGM entry point selection in the Protege
System. When you assign a PGM or a PGM group to a module or an area, for example, the screen displays the
PGM address format by default.
PGM Group to
modify: PG001
When the desired PGM group appears on the screen, press [ENTER] to program the PGM group. The
maximum number of PGM groups that can be programmed is limited by your system's memory and configured
profile.
To browse the PGM groups by name press [ENTER] when prompted for a PGM group to modify and then use
the [] and [] keys to scroll the available PGM groups by their name.
Selecting a PGM Group to Modify
Each PGM Group is assigned a unique door type number from 001 to 064. Your system will be limited to
specific number of PGM groups that are defined in the selected profile. For information on profiles refer to the
Advanced Programming Section (see page 207).
PGM Group to
modify: PG001
Type the appropriate 3-digit PGM group number or use the [] and [] keys to scroll the available PGM groups.
When the desired PGM group appears on the screen, press [ENTER] to program the selected PGM Group.
PGM Number 1 In PGM Group
Each PGM group can be assigned up to 8 PGM's program the item number 1 of 8 in this location.
PG001 Item [1]
pgm: --000:00
To modify the PGM item 1 entry, use the settings as explained in section Entering PGM and PGM Groups (see
page 345). You can not program a PGM group that will reference a PGM group in the PGM item settings.
148 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE