Protege System Controller Reference Manual

• Disabled the reader will turn on the Green LED when the door is unlocked.
Option 4 – Disable Buzzer Processing
• Enabled the reader expander will not control the Buzzer Output (BZ) and the PGM can be used for another
function.
• Disabled the reader will control the buzzer output.
Option 5 - 8 - Reserved
• Reserved do not modify
Enabling/disabling or modifying the settings of reserved options is not recommended.
Reader Port 1 Elevator Options
Options that relate to the elevator functions.
RD001 R1 Elv Opt
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 344).
Option 1 – Invert Floor Relays
• Enabled the reader expander will invert all the relays on the PX16's connected that are used for elevator
control.
• Disabled the reader will not invert the relays.
Option 2 – Control on Comm Fail
• Enabled the PX16 used for elevator control will control the state of the relays when they go offline. Option
3 determines the state the relays will go into.
• Disabled the PX16 used for elevator control will not change the state of the relays when they go offline..
Option 3 – Activate on Comm Fail
• Enabled the PX16 will activate the relays when they go offline.
• Disabled the PX16's will deactivate the relays when they go offline.
Option 4 - 8 - Reserved
• Reserved do not modify
Enabling/disabling or modifying the settings of reserved options is not recommended.
Reader Port 1 Function PGM
You can assign a PGM or PGM group that is used by the multiple badge options.
RD001 R1 Func
pgm: --000:00
To modify the PGM or PGM Group, use the settings as explained in section Entering PGM and PGM Groups
(see page 345).
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 77