Protege System Controller Reference Manual

Option 2 - Door Open Event When On Schedule
• Enabled the door will not log a door opened event when it is unlocked on schedule. This will prevent the
door from filling the event buffer with events that are not needed.
• Disabled the door will generate a door open and close.
Option 3 - Generate Door Pre-Alarm Event
• Enabled the door will generate a pre-alarm event when the pre-alarm timer for the door is reached.
• Disabled no pre-alarm event will be generated.
Option 4 - Generate Door Left Open Event
• Enabled the door will generate a door left open event when the door maximum open time is reached.
• Disabled no left open event will be generated.
Option 5 - Relock Door When Closed
• Enabled the door will lock when it detects a door close event and the lock output is activated.
• Disabled the relock function will not control the door.
Option 6 - Unlock Request To Exit (REX)
• Enabled the door will activate the lock PGM when a request to exit occurs.
• Disabled the door will not control the lock PGM.
Option 7 - Unlock Request To Enter (REN)
• Enabled the door will activate the lock when a request to enter occurs.
• Disabled the door will not control the lock PGM.
Option 8 - Late Open Schedule
• Enabled the Door will not unlock on schedule until the first access has been accepted at the door.
• Disabled the first user in will not prevent the schedule from operating and will activate the door if
programmed normally.
Special Options
Special options for the door include the control of the door from the inside and outside areas.
DR001 Special
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 344).
Option 1 - Door Lock Follows Inside Area
• Enabled the door will unlock if the inside area is disarmed. If no arm/disarm schedule is set, Option 6 MUST
be enabled for this function to operate.
• Disabled the door will not unlock when the inside area is disarmed.
Option 2 - Door Lock Follows Outside Area.
• Enabled the door will unlock if the outside area is disarmed. If no arm/disarm schedule is set, Option 6
MUST be enabled for this function to operate.
• Disabled the door will not unlock when the outside area is disarmed.
Option 3 - Prevent Slave Door Unlocking On Inside Area
• Enabled the door will not activate the slave door if the inside area is armed.
• Disabled the slave door will activate regardless of the inside area status.
PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 137