Protege System Controller Reference Manual

Zone Number Description Type Group
ZXxxx:08 Bell 2 Over Current Bell/PGM Fault General
ZXxxx:09 Reserved * *
ZXxxx:10 Reserved * *
ZXxxx:11 Reserved * *
ZXxxx:12 Reserved * *
ZXxxx:13 Reserved * *
ZXxxx:14 Reserved * *
ZXxxx:15 Reserved * *
ZXxxx:16 Module Offline Module Offline System
In the above table a '*' indicates that the trouble zone will not generate a system trouble as by default it is not
assigned a trouble type or group. A trouble group and type can be assigned if required but is not recommended
for reserved zones.
When using the reference table the zone expander address should be used in place of the 'xxx'.
PGM Expander
The following lists the trouble zones that operate on the PGM expander module. The PGM expander module
has 8 trouble zones.
Zone Number Description Type Group
PGxxx:01 Module Tamper System Tamper System
PGxxx:02 AC failure Power Fault General
PGxxx:03 Low Battery Power Fault General
PGxxx:04 Aux Failure Power Fault General
PGxxx:05 Relay Supply Failure Power Fault General
PGxxx:06 Reserved * *
PGxxx:07 Reserved * *
PGxxx:08 Module Offline Module Offline System
In the above table a '*' indicates that the trouble zone will not generate a system trouble as by default it is not
assigned a trouble type or group. This can be done if required but is not recommended.
When using the reference table the PGM expander address should be used in place of the 'xxx'.
Reader Expander
The following lists the trouble zones that operate on the reader expander module. The reader expander module
has 16 trouble zones.
Zone Number Description Type Group
RDxxx:01 Module Tamper System Tamper System
RDxxx:02 AC failure Power Fault General
RDxxx:03 Low Battery Power Fault General
RDxxx:04 Aux Failure Power Fault General
324 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE