Protege System Controller Reference Manual

Elevator Group
The elevator group selects the elevators to control as a result of the action being performed by the
programmable function.
FN001 Elev Grp
None
Use the [1] and [3] keys to scroll the action types until you reach the elevator group that you want to control and
then press [ENTER] to proceed to the next programmable option for the door control function. For more
information about the list control data entry refer to the section List Control Data Entry (see page 344).
Floor Group
The floor group selects the floors that will be activated on all of the elevators in the elevator group as a result of
the action being performed by the programmable function.
FN001 Floor Grp
None
Use the [1] and [3] keys to scroll the floor groups until you reach the required group and then press [ENTER] to
proceed to the next programmable option for the elevator control function. For more information about the list
control data entry refer to the section List Control Data Entry (see page 344).
Token Unlock Time
The token unlock time is the period of time the floor group will be activated for as a result of the action by the
programmable function.
FN001 Token
time: 010 secs
Elevator Control Mode
The control mode selects how the floor group will be controlled. This allows a door to be unlocked for the token
time, unlock latched or unlocked in the fire alarm mode.
FN001 Door Mode
Menu Timed
Use the [1] and [3] keys to scroll the door control mode until you reach the setting that you want to use and then
press [ENTER] to proceed to the next programmable option for the door control function. For more
information about the list control data entry refer to the section List Control Data Entry (see page 344).
Door Mode
Menu Timed
Menu Latched
Fire Control
Description
The Floor Group will be unlocked for the token time that is programmed for the
programmable function. Use this mode when you want to unlock the door for defined
time. The floors will lock after the token time has expired.
The floors will be latched in the unlocked state and will remain unlocked until controlled
from:
• An LCD Keypad
• Protege System Management Suite
• Scheduled Action
• Area Status
• A Programmable function.
The door will be latched in the fire control unlock state and will remain unlocked until
controlled from:
• An LCD Keypad
252 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE