Handbook of Solvents - George Wypych - ChemTech - Ventech!

1290 Carlos M. Nu�ez
Schedule Source Categories Compliance Date
7-Year
10-Year
Ferroalloys Production 05/20/01
Flexible Polyurethane Foam Production 10/08/01
Generic MACT: Acetal Resins, Hydrogen Fluoride,
Polycarbonates Production, Acrylic/Modacrylic Fibers
06/29/02
Mineral Wool Production 06/01/02
Nylon 66 Production Delisted
Oil & Natural Gas Production 06/17/02
Pesticide Active Ingredient Production:
4-Chlor-2-Methyl Acid Production; 2,4 Salts & Esters
Production; 4,6-dinitro-o-cresol Production;
Butadiene Furfural Cotrimer; Captafol Production;
Captan Production; Chloroneb Production;
Dacthal TM Production; Sodium Pentachlorophenate
Production; TordonTM Acid Production
06/30/02
Pharmaceutical Production 09/21/01
Phosphoric Acid / Phosphate Fertilizers 06/10/02
Polyether Polyols Production 06/01/02
Portland Cement Manufacturing Not available
Primary Aluminum Production 10/07/99
Primary Lead Smelting 06/04/02
Pulp & Paper (non-combust) - MACT I 04/15/01
Pulp & Paper (non-combust) - MACT III 04/16/01
Steel Pickling - HCl Process 06/22/01
Tetrahydrobenzaldehyde Manufacture
known as Butadiene Dimers Production)
(formerly
05/12/01
Wood Treatment MACT Delisted
Wool Fiberglass Manufacturing 06/14/01
Cyanuric Chloride Production Delisted
Lead Acid Battery Manufacturing Delisted
Natural Gas Transmission & Storage 06/17/02
Under Section 112 of Title III of the CAA of 1990, EPA will regulate all major sources
and area sources deemed appropriate. A major source is a stationary source located within a
contiguous area under common control that emits or has the potential to emit ≥ 9.1 Mg/yr
(10 tons/yr) of a single HAP or ≥23.7 Mg/yr (25 tons/yr) of a combination of HAPs. An area
source is a non-major stationary source. Under Section 112, EPA is required to promulgate
40 categories by 1992, 25 percent of the listed categories by 1994, an additional 25 percent