Handbook of Solvents - George Wypych - ChemTech - Ventech!

7.1 Introduction to diffusion, swelling, and drying 355
cesses. The two basic parameters affecting drying rate are temperature and film thickness.
Figure 7.1.26 shows that the diffusion coefficient increases as temperature increases. Figure
7.1.27 shows that by reducing film thickness, drying time can be considerably reduced. 40
Further information on the design and modelling of drying processes can be found in a
review paper 41 which analyzes drying process in multi-component systems.
REFERENCES
1 J S Vrentas and J.L. Duda, J. Polym. Sci., Polym. Phys. Ed., 15, 403 (1977); 17, 1085, (1979).
2 J S Vrentas, C M Vrentas, J. Polym. Sci., Part B: Polym Phys., 30(9), 1005-11 (1992).
3 D Arnauld, R L Laurence, Ind. Eng. Chem. Res., 31(1), 218-28 (1992).
4 F D Blum, S Pickup, R A Waggoner, Polym. Prep., 31 (1), 125-6 (1990).
5 C Bouchard, B Guerrier, C Allain, A Laschitsch, A C Saby, D Johannsmann, J. Appl. Polym. Sci., 69,
No.11, 2235-46 (1998).
6 G Fleischer, J Karger, F Rittig, P Hoerner, G Riess, K Schmutzler, M Appel, Polym. Adv. Technol., 9,
Nos.10-11, 700-8 (1998).
7 C F Fong, , Y Li, De Kee, J Bovenkamp, Rubber Chem. Technol., 71(2), 285-288 (1998).
8 Jinhua Chen, Kang Chen, Hong Zhang, Wanzhi Wei, Lihua Nie, Shouzhuo Yao, J. Appl. Polym. Sci., 66,
No.3, 563-71 (1997).
9 I Linossier, F Gaillard, M Romand, J F Feller, J. Appl. Polym. Sci., 66, No.13, 2465-73 (1997).
10 L Meistermann, M Duval, B Tinland, Polym. Bull., 39, No.1, 101-8 (1997).
11 J S Qi, C Krishnan, J A Incavo, V Jain, W L Rueter, Ind. Eng. Chem. Res., 35, No.10, 3422-30 (1996).
12 Z Hrnjak-Murgic, J Jelencic, M Bravar, Angew. Makromol. Chem., 242, 85-96 (1996).
13 B Hladik, S Frahn, W Borchard, Polym. Polym. Compos., 3, No.1, 21-8 (1995).
14 J Frenkel, Rubber Chem. Technol., 13, 264 (1940).
15 P J Flory, J Rehner, J. Chem. Phys., 11, 521 (1943).
16 P J Flory, J. Chem. Phys., 18, 108 (1950).
17 H J Mencer, Z Gomzi, Eur. Polym. J., 30, 1, 33-36, (1994).
18 A G Webb, L D Hall, Polymer, 32(16), 2926-38 (1991).
19 M Ercken, P Adriensens, D Vanderzande, J Gelan, Macromolecules, 28, 8541-8547, (1995).
20 F Horkay, A M Hecht, E Geissler, Macromolecules, 31, No.25, 8851-6 (1998).
21 M Sen, O Guven, Polymer, 39, No.5, 1165-72 (1998).
22 M Sen, A Yakar, O Guven, Polymer, 40, No.11, 2969-74 (1999).
23 Y D Zaroslov, O E Philippova, A R Khokhlov, Macromolecules, 32, No.5, 1508-13 (1999).
24 B H Stuart, D R Williams, Polymer, 35, No.6, 1326-8 (1994).
25 B H Stuart, D R Williams, Polymer, 36, No.22, 4209-13 (1995).
26 F M Fowkes, D O Tischler, J. Polym. Sci., Polym. Chem. Ed., 22, 547 (1984).
27 L A Errede, Macromol. Symp., 114, 73-84 (1997).
28 L A Errede, P J Henrich, J N Schroepfer, J. Appl. Polym. Sci., 54, No.5, 649-67 (1994).
29 M O Ngui, S K Mallapragada, J. Polym. Sci.: Polym. Phys. Ed., 36, No.15, 2771-80 (1998).
30 N A Peppas, J C Wu, E D von Meerwall, Macromolecules, 27, 5626 (1994).
31 S Kojima, T Moriga, Polym. Eng. Sci., 35, No.13, 1098-105 (1995).
32 R A Cairncross, S Jeyadev, R F Dunham, K Evans, L F Francis, L Scriven, J. Appl. Polym. Sci., 58, No.8,
1279-90 (1995).
33 D C Shepard, J. Coat. Technol., 68, No.857, 99-102 (1996).
34 L Khal, E Juergens, J Petzoldt, M Sonntag, Urethanes Technology, 14, No.3, 23-6 (1997).
35 J S Vrentas, C M Vrentas, J. Polym. Sci., Part B: Polym Phys., 30(9), 1005-11 (1992).
36 J S Vrentas, C M Vrentas, J. Appl. Polym. Sci., 60, No.7, 1049-55 (1996).
37 J Crank, Proc. Phys. Soc., 63, 484 (1950).
38 L Ion, J M Vergnaud, Polym. Testing, 14, No.5, 479-87 (1995).
39 S Norasetthekul, A M Gadalla, H J Ploehn, J. Appl. Polym. Sci., 58, No.11, 2101-10 (1995).
40 G A Abraham, T R Cuadrado, International Polym. Process., 13, No.4, Dec.1998, 369-78.
41 Z Pakowski, Adv. Drying, 5, 145-202 (1992).