NXS Form 63-2600, Users Manual, Technical Data - CONTROL ...

Control keypad 99(110)
7
Enter the edit mode by pushing the right arrow menu button. The present value shown starts to
blink. Use the Browser buttons to change the amount of retries. Accept the change with the Enter
button or return to the previous level with the left arrow menu button
See Figure 7-23 for the procedure of changing the value.
7.3.6.8 System info
In the System info submenu (S6.8) frequency drive-related hardware and software information as
well as operation-related information, can be found.
Total counters (S6.8.1)
In the Total counters page (S6.8.1) is information related to the frequency drive operation times,
i.e. the total numbers of MWh, operation days and operation hours passed so far. Unlike the
counters in the Trip counters menu, these counters cannot be reset.
Note! The operation time counter (days and hours) runs anytime the power is on.
Page Counter Example
C6.8.1.1 MWh counter
C6.8.1.2 Operation day counter Value on display is 1.013. the drive has
operated for 1 year and 13 days
C6.8.1.3 Operation hour counter Value on display is 7:05:16. The drive has
operated for 7 hours 5 minutes and 16 seconds.
Table 7-7. Counter pages
Trip counters (S6.8.2)
Trip counters (menu S6.8.2) are counters the values of which can be reset i.e. restored to zero.
The following resettable counters are available:
Note! The trip counters run only when the motor is running.
Page
Counter
T6.8.2.1 MWh counter
T6.8.2.3 Operation day counter
T6.8.2.4 Operation hour counter
Table 7-8. Resettable counters
The counters can be reset on pages 6.8.2.2 (MWh counter reset) and 6.8.2.5 (Operation time
reset).
Example: To reset the operation counters:
Automation and Control Solutions
Honeywell
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MIN 55422 Scarborough, Ontario 63-2600-1
MIV 4Z9
www.honeywell.com